Table of Content
If the above steps don’t work, you may need to factory reset your C by GE bulb and set up the bulb again. Select the light bulb you’d like to set up. After setting up your Merkury Smart bulb, you may notice issues with the connectivity if you are currently connected to a 5GHz Wi-Fi network. It gives you the status of your home and keeps you up to date with everything, that includes your safety at home too. You’ve now completed linking your lights to Google Home. Now it’s time to make sure that they all work.
At the top right, tap SettingsRoomscroll to the bottom and tap Add a custom roomenter the room nametap Save. At the top right, tap Settings Room choose a roomtap Save. For better control, give each of your bulbs its own nickname. To schedule a Routine, set the time and day, and the speaker you want to use.
How To Hide Urine Stains From A Black Light
For most part these smart bulbs tend to work without a hitch but if you own a smart bulb, you are ought to get it reset every once in a blue moon. So, learning the process of factory resetting the smart bulb is very important for the owners. Check the light switch and make sure that it’s switched ON. The light bulb requires an “always-on” power supply to operate properly.
Then select the smart lighting option and a dialogue box will appear. Cannot connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Smart Wi-Fi Bulb - Color
Please make sure the voltage of the LED bulb is compatible with the main electricity of your country before connecting to a bulb holder. Ensure that the base of the bulb matches the bulb holder. This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, the device should be replaced. By following these simple steps, you can easily reset your Merkury light bulb whenever you need to. Once the app is installed on your phone, open it and follow the instructions for pairing your lights with Bluetooth.
There are a few ways to connect MERKURY lights to your phone. The first way is to use the MERKURY Smart Bridge. The Smart Bridge allows you to control your lights using the MERKURY Home app. In this blog post, we will teach you how to connect your Merkury light bulb in just a few easy steps. On your home tab of the app look for the “+” symbol at the upper right corner and click on it.
Add the bulb to a new room in your current home
You’ll then be able to choose a more familiar name. If you’re looking to connect your Merkury light bulb without using Wi-Fi, there are a few things you’ll need to do. First, make sure that the power adapter is properly plugged into an outlet and your light bulb is screwed in tightly. Next, locate the reset button on the bottom of the power adapter and press it for three seconds. Tap “Merkury Smart Bulb” from the list of available devices and follow the on-screen instructions to connect it to your Wi-Fi network. Once connected, you should see a confirmation message in the app indicating that the bulb has been successfully added.
Similarly, it is important to mention how there will be certain instructions that you might have to follow on-screen. Google Home offers a great way of being able to control all the smart lights in your house. Using a single app, you can have complete control over all compatible smart appliances. Though before you can use any of the devices, you will first have to connect it with Google Home.
Move C by GE bulbs from the C by GE app to the Google Home app
Then attempt to re-setup your bulbs using the Google Home app. Other devices near your speaker or display, or C by GE bulbs, might cause interference. If you have a nearby Wi-Fi router, cordless phone, microwave, or Bluetooth speaker, move it further away if you can. The bulb takes up to one minute after receiving power to reconnect to the speaker or display.
First, make sure that the bulb is within range of your router. If it’s too far away, it won’t be able to connect. The bulb should blink 2x per second if it’s properly reset. Secondly, check your WIFI’s band, if the band is 5GHz then the bulb will not connect.
Choose whether you are setting up a Google Home device or a device from a third-party. The next step is for you to add the Smart Light Bulb into the Google Home App.
Do not install the device with wet hands or when standing on wet or damp surfaces. Suitable for use in operating environment between -20°C and 40°C (-4°F and 104°F). Not for use in totally enclosed luminaires.
First, check to make sure that the bulbs are compatible with your home’s Wi-Fi network. If they are, then you’ll need to reset the bulbs by turning them off and on again. In this step of how to reset a merkury smart bulb, we will be turning the bulb off and on at one to two second intervals to reset the bulb. You will need to do this 3 times to reset your bulb. The Smart Bulb uses Bluetooth 4.0 technology to connect to your iOS or Android device.
No comments:
Post a Comment